1972 Dodge Charger Rallye Engine Options and Specifications
In 1972 the Dodge Charger Rallye could be ordered with five different engines.
For the 1972 Charger Rallye, the 318 2 barrel engine was the standard engine. Four engine options were available including the 340 4 barrel, the 400 2 barrel, the 400 4 barrel and the 440 4 barrel.
This article will include the 1972 Charger Rallye engine options and their specifications. This includes the engine code, cost, displacement, horsepower, torque, compression ratio, camshaft, lifter type, valve sizes, bore, stroke, air cleaner, exhaust, fuel and carburetion.
1972 Dodge Charger Rallye Engine Options and Specifications
The 1972 Charger Rallye came with the following engines.
- 318 2 barrel (Standard)
- 340 4 barrel (Optional)
- 400 2 barrel (Optional)
- 400 4-barrel (Optional)
- 440 High Performance 4 barrel (Optional)
Originally another engine was planned for the 1972 Charger Rallye. The engine was the 440 Six Pack. The ads, brochures and dealer information printed for 1972 indicated the 440 Six Pack as an available engine option for the Charger Rallye, except for California.
Please see the 1972 Dodge Charger Rallye brochure in the photo below. The engine specs are included down further in this article.
The Six Pack plans were quickly scrapped but not before a few of the cars were produced. We know of a few and one GTX which is shown in the video near the end of this article.
The 426 Hemi engine was dropped and was not available for 1972. The 383 was also dropped for 1972 and was replaced by the 400 engine.
In 1972 manufacturers began rating horsepower and torque with net ratings.
1972 Gross to Net Horsepower and Torque Change
Prior to 1971 an engine’s gross horsepower and torque were used for the factory power ratings. In 1971, the manufacturers reported both gross and net horsepower and torque. Starting in 1972 SAE gross horsepower was no longer used and the SAE net horsepower became the new rating.
Gross and net horsepower are both measured at the crank. The difference is the use of engine accessories, air cleaner and factory exhaust to calculate net horsepower which is not used for gross horsepower.
Therefore, in addition to horsepower robbing internal engine changes, the net rating lowered the power numbers for 1972.
1972 Dodge Charger Rallye with a 318 2-barrel Engine
In 1972 the 318 2-barrel was the standard engine for the Charger Rallye.
The engine code was E44. let’s take a look at the specifications.
| Specifications | 318 2-barrel |
| Displacement | 318 |
| Bore and Stroke | 3.91″ x 3.31″ |
| Horsepower | 150 @ 4,000 RPM |
| Torque | 260 @ 1,600 RPM |
| Compression Ratio | 8.6:1 |
| Cam Duration/Overlap | 240°/248°/26° |
| Cam Lift | .373″/.399″ |
| Lifter Type | Hydraulic |
| Valve Diameter, Intake | 1.78″ |
| Valve Diameter, Exhaust | 1.50″ |
| Carburetion | Single Ball and Ball 2-bbl |
| Air Cleaner | Single Snorkel |
| Exhaust System | Single |
| Fuel Recommended | Regular |
1972 Charger Rallye With a 340 4-barrel
The 340 4-barrel engine was available as an option for the 1972 Charger Rallye. The compression ratio was drastically reduced from 10.3:1 to 8.5:1.
The 1.88″ intake valves were smaller than the 2.02″ valves the year before.
The first 340s produced had a forged crankshaft. As of April 11, 1972 a cast crankshaft replaced the forged crankshaft starting with 340 engine serial number HM340R-3911-8000. In addition, a different damper and a torque converter and/or flywheel with special balance was used.
The engine code was E55. Let’s take a look at the specifications.
| Specifications | 340 4-barrel |
| Displacement | 340 |
| Bore and Stroke | 4.04″ x 3.31″ |
| Horsepower | 240 @ 4,800 RPM |
| Torque | 290 @ 3,600 RPM |
| Compression Ratio | 8.5:1 |
| Camshaft | High lift, high performance |
| Cam Duration/Overlap | 268°/276°/44° |
| Cam Lift | .429″/.444″ |
| Lifter Type | Hydraulic |
| Valve Diameter, Intake | 1.88″ |
| Valve Diameter, Exhaust | 1.60″ |
| Carburetion | Single Carter 4-bbl |
| Air Cleaner | Unsilenced |
| Exhaust System | Dual, low restriction |
| Fuel Recommended | Regular |
1972 Dodge Charger Rallye With a 400 2-barrel
The 400 2-barrel engine was optional for the 1972 Dodge Charger Rallye. It was the first year the engine was available for the Charger and replaced the 383 which was discontinued.
The 400 engine was essentially the same as a 383 with the same stroke but with a bigger bore size.
Let’s take a close look at the 400 2 barrel engine specifications.
| Specifications | 400 2-barrel |
| Displacement | 400 |
| Bore and Stroke | 4.342″ x 3.375″ |
| Horsepower (Net) | 190 @ 4,400 RPM |
| Torque (Net) | 310 @ 2,400 RPM |
| Compression Ratio | 8.2:1 |
| Camshaft | Hydraulic |
| Cam Duration/Overlap | 260°/268°/38° |
| Cam Lift | .434″/.430″ |
| Lifter Type | Hydraulic |
| Valve Diameter, Intake | 2.08″ |
| Valve Diameter, Exhaust | 1.74″ |
| Carburetion | Single 2-bbl |
| Air Cleaner | Silenced |
| Exhaust System | Single |
| Fuel Recommended | Regular |
1972 Dodge Charger Rallye With a 400 High Performance 4-barrel
The 400 4-barrel engine was optional for the 1972 Dodge Charger Rallye. It was the first year the engine was available for the Charger and replaced the 383 which was discontinued.
The 400 engine was essentially the same as a 383 with the same stroke but with a bigger bore size. The engine code is E68.
Let’s take a close look at the 400 4 barrel engine specifications.
| Specifications | 400 4-barrel |
| Displacement | 400 |
| Bore and Stroke | 4.342″ x 3.375″ |
| Horsepower (Net) | 255 @ 4,800 RPM |
| Torque (Net) | 340 @ 3,200 RPM |
| Compression Ratio | 8.2:1 |
| Camshaft | High lift, high performance |
| Cam Duration/Overlap | 268°/284°/46° |
| Cam Lift | .450″/.464″ |
| Lifter Type | Hydraulic |
| Valve Diameter, Intake | 2.08″ |
| Valve Diameter, Exhaust | 1.74″ |
| Carburetion | Single 4-bbl |
| Air Cleaner | Dual Snorkel |
| Exhaust System | Dual, low restriction |
| Fuel Recommended | Regular |
1972 Charger Rallye With a 440 High Performance 4-barrel
The 440 High Performance 4-barrel was available for the 1972 Charger Rallye. The engine’s horsepower and torque were decreased from the previous year. Partly due to the net ratings and a decrease in compression ratio.
The 1972 compression ratio decreased from 9.7:1 to 8.2:1 from the previous year. Also, there was a slight change for the camshaft exhaust lift. Another change was the carburetor brand which switched from Carter to Holley.
The engine code was 86. Let’s take a look at the specifications.
| Specifications | 440 4-barrel |
| Displacement | 440 |
| Bore and Stroke | 4.32″ x 3.75″ |
| Horsepower (Net) | 280 @ 4,800 RPM |
| Torque (Net) | 375 @ 3,200 RPM |
| Compression Ratio | 8.2:1 |
| Camshaft | High lift, long duration, high overlap |
| Cam Duration/Overlap | 268°/284°/46° |
| Cam Lift | .450″/.464″ |
| Lifter Type | Hydraulic |
| Valve Diameter, Intake | 2.08″ |
| Valve Diameter, Exhaust | 1.74″ |
| Carburetion | Single Holley 4-bbl |
| Air Cleaner | Dual Snorkel |
| Exhaust System | Dual, low restriction |
| Fuel Recommended | Regular |
1972 Dodge Charger Rallye With a 440 Six Pack
The 440 Six Pack was only available as an option for the 1972 Charger Rallye prior to the production start of the year. As stated earlier, at least a few snuck out of the factory with the Six Pack engine.
It appears almost all the engine specifications remained the same from 1971 to 1972. There was a slight change with the camshaft exhaust lift.
The engine code was E87. Let’s take a look at the specifications.
| Specifications | 440 Six Pack |
| Displacement | 440 |
| Bore and Stroke | 4.32″ x 3.75″ |
| Horsepower (Net) | 330 @ 4,700 RPM |
| Torque (Net) | 410 @ 3,200 RPM |
| Compression Ratio | 10.3:1 |
| Camshaft | High lift, long duration, high overlap |
| Cam Duration/Overlap | 268°/284°/46° |
| Cam Lift | .450″/.464″ |
| Lifter Type | Hydraulic |
| Valve Diameter, Intake | 2.08″ |
| Valve Diameter, Exhaust | 1.74″ |
| Carburetion | Triple Holley 2-bbl |
| Air Cleaner | Unsilenced |
| Exhaust System | Dual, low restriction |
| Fuel Recommended | Premium |
That’s the complete list of engines available for the 1972 Dodge Charger Rallye. If you have any questions to ask me about the engine options or specifications for the 1972 Charger Rallye car model, send us an email found specifically on my contact page or comment below.
About 38 years ago I assembled my first Mopar engine, it was for a 1970 ‘Cuda. It’s at that time my hands on experience with Mopar cars and engines, including the 440, started. Although my research of the engines started years earlier.
Read More B-body Charger Articles
1968 Dodge Charger R/T Engine Options and Specs
1969 Dodge Charger R/T Engine Options and Specs
1970 Dodge Charger R/T Engine Options and Specs
1971 Dodge Charger R/T Engine Options and Specs
1973 Dodge Charger Rallye Engine Options and Specs
1974 Dodge Charger Rallye Engine Options and Specs
Article Resources
- 1972 Dodge Service Manual
- 1972 Dodge Charger Dealer Brochure
- 1972 Dodge Dealer’s Data Book
- Google Books: Chrysler Engines 1922-1998
