1972 Plymouth Road Runner GTX Engine Options and Specs
In 1972 the stand alone GTX model was dropped. Depending on the engine ordered for a 1972 Road Runner, the GTX name was added to the Road Runner calling it the Plymouth Road Runner GTX. It only came with one engine.
For the 1972 Plymouth Road Runner GTX, the 440 High Performance 4 barrel engine was the standard engine. No other engine options were available for the Road Runner GTX.
This article will include the 1972 Road Runner GTX 440 engine option and its specifications. This includes the engine code, cost, displacement, horsepower, torque, compression ratio, camshaft, lifter type, valve sizes, bore, stroke, air cleaner, exhaust, fuel and carburetion.
1972 Plymouth Road Runner GTX Engine Options and Specifications
The 1972 Road Runner GTX came with the following engine.
- 440 High Performance 4-barrel (Standard)
Technically there were two engines planned for the 1972 Road Runner GTX. The second engine was the 440 Six Barrel. The ads, brochures and dealer information printed for 1972 indicated the 440 Six Barrel as an available engine option for the GTX. Please see the 1972 Road Runner GTX brochure in the photo below.
The Six Barrel plans were quickly scrapped but not before a few of the cars were produced. We know of at least one GTX which is shown in the video near the end of this article.
The 426 Hemi engine was dropped and was not available for 1972.
In 1972 manufacturers began rating horsepower and torque with net ratings.
1972 Gross to Net Horsepower and Torque Change
Prior to 1971 an engine’s gross horsepower and torque were used for the factory power ratings. In 1971, the manufacturers reported both gross and net horsepower and torque. Starting in 1972 SAE gross horsepower was no longer used and the SAE net horsepower became the new rating.
Gross and net horsepower are both measured at the crank. The difference is the use of engine accessories, air cleaner and factory exhaust to calculate net horsepower which is not used for gross horsepower.
Therefore, in addition to horsepower robbing internal engine changes, the net rating lowered the power numbers for 1972.
1972 Road Runner GTX With a 440 High Performance 4-barrel
The 440 High Performance 4-barrel was available for the 1972 Road Runner GTX. The engine’s horsepower and torque were decreased from the previous year. Partly due to the net ratings and a decrease in compression ratio.
The 1972 compression ratio decreased from 9.7:1 to 8.2:1 from the previous year. Also, there was a slight change for the camshaft exhaust lift. Another change was the carburetor brand which switched from Carter to Holley.
The engine code was 86. Let’s take a look at the specifications.
| Specifications | 440 4-barrel |
| Displacement | 440 |
| Bore and Stroke | 4.32″ x 3.75″ |
| Horsepower (Net) | 280 @ 4,800 RPM |
| Torque (Net) | 375 @ 3,200 RPM |
| Compression Ratio | 8.2:1 |
| Camshaft | High lift, long duration, high overlap |
| Cam Duration/Overlap | 268°/284°/46° |
| Cam Lift | .450″/.464″ |
| Lifter Type | Hydraulic |
| Valve Diameter, Intake | 2.08″ |
| Valve Diameter, Exhaust | 1.74″ |
| Carburetion | Single Holley 4-bbl |
| Air Cleaner | Dual Snorkel |
| Exhaust System | Dual, low restriction |
| Fuel Recommended | Regular |
1972 Road Runner GTX With a 440 6-barrel
The 440 Six Barrel was only available as an option for the 1972 Road Runner GTX prior to the production start of the year. As stated earlier, at least one GTX snuck out of the factory with the Six Barrel engine.
It appears almost all the engine specifications remained the same from 1971 to 1972. There was a slight change with the camshaft exhaust lift.
The engine code was E87. Let’s take a look at the specifications.
| Specifications | 440 Six Barrel |
| Displacement | 440 |
| Bore and Stroke | 4.32″ x 3.75″ |
| Horsepower (Net) | 330 @ 4,700 RPM |
| Torque (Net) | 410 @ 3,200 RPM |
| Compression Ratio | 10.3:1 |
| Camshaft | High lift, long duration, high overlap |
| Cam Duration/Overlap | 268°/284°/46° |
| Cam Lift | .450″/.464″ |
| Lifter Type | Hydraulic |
| Valve Diameter, Intake | 2.08″ |
| Valve Diameter, Exhaust | 1.74″ |
| Carburetion | Triple Holley 2-bbl |
| Air Cleaner | Unsilenced |
| Exhaust System | Dual, low restriction |
| Fuel Recommended | Premium |
That’s the complete list of engines available for the 1972 Plymouth Road Runner GTX. If you have any questions to ask me about the engine options or specifications for the 1972 Road Runner GTX car model, send us an email found specifically on my contact page or comment below.
About 38 years ago I assembled my first Mopar engine, it was for a 1970 ‘Cuda. It’s at that time my hands on experience with Mopar cars and engines, including the 440, started. Although my research of the engines started years earlier.
Read More B-body GTX Articles
1967 Plymouth Belvedere GTX Engine Options and Specifications
1968 Plymouth GTX Engine Options and Specifications
1969 Plymouth GTX Engine Options and Specifications
1970 Plymouth GTX Engine Options and Specifications
1971 Plymouth GTX Engine Options and Specifications
1973 Plymouth Road Runner GTX Engine Options and Specifications
1974 Plymouth Road Runner GTX Engine Options and Specifications
Article Resources
- 1972 Plymouth Service Manual
- 1972 Plymouth Satellite Dealer Brochure
- Google Books: Chrysler Engines 1922-1998
- Wikipedia: Plymouth GTX
